Foldable Printed Circuit Boards on Paper Substrates
View/ Open
25270246.pdf (756.1Kb)
Access Status
Full text of the requested work is not available in DASH at this time ("restricted access"). For more information on restricted deposits, see our FAQ.Author
Siegel, Adam C.
Phillips, Scott T.
Dickey, Michael D.
Lu, Nanshu
Published Version
https://doi.org/10.1002/adfm.200901363Metadata
Show full item recordCitation
Siegel, Adam C., Scott T. Phillips, Michael D. Dickey, Nanshu Lu, Zhigang Suo, and George M. Whitesides. 2010. “Foldable Printed Circuit Boards on Paper Substrates.” Advanced Functional Materials 20 (1) (January 8): 28–35. doi:10.1002/adfm.200901363.Abstract
This paper describes several low-cost methods for fabricating flexible electronic circuits on paper. The circuits comprise i) metallic wires (e.g., tin or zinc) that are deposited on the substrate by evaporation, sputtering, or airbrushing, and ii) discrete surface-mountable electronic components that are fastened with conductive adhesive directly to the wires. These electronic circuits—like conventional printed circuit boards—can be produced with electronic components that connect on both sides of the substrate. Unlike printed circuit boards made from fiberglass, ceramics, or polyimides, however, paper can be folded and creased (repeatedly), shaped to form three-dimensional structures, trimmed using scissors, used to wick fluids (e.g., for microfluidic applications) and disposed of by incineration. Paper-based electronic circuits are thin and lightweight; they should be useful for applications in consumer electronics and packaging, for disposable systems for uses in the military and homeland security, for applications in medical sensing or low-cost portable diagnostics, for paper-based microelectromechanical systems, and for applications involving textiles.Other Sources
http://gmwgroup.harvard.edu/pubs/pdf/1075.pdfCitable link to this page
http://nrs.harvard.edu/urn-3:HUL.InstRepos:33373173
Collections
- FAS Scholarly Articles [17809]
Contact administrator regarding this item (to report mistakes or request changes)
Comments made during the workflow steps
FAR 2011 Suo emailed 2016-04-24 MM Suo emailed 2017-03-10 MM meta.dark