Person:

Penna, Robert

The X-ray spectra of accretion discs of eight stellar mass black holes have been analysed to date using the thermal continuum-fitting method, and the spectral fits have been used to estimate the spin parameters of the black holes. However, the underlying model used in this method of estimating spin is the general relativistic thin-disc model of Novikov & Thorne, which is only valid for razor-thin discs. We therefore expect errors in the measured values of spin due to inadequacies in the theoretical model. We investigate this issue by computing spectra of numerically calculated models of thin accretion discs around black holes, obtained via three-dimensional general relativistic magnetohydrodynamic (GRMHD) simulations. We apply the continuum-fitting method to these computed spectra to estimate the black hole spins and check how closely the values match the actual spin used in the GRMHD simulations. We find that the error in the dimensionless spin parameter is up to about 0.2 for a non-spinning black hole, depending on the inclination. For black holes with spins of 0.7, 0.9 and 0.98, the errors are up to about 0.1, 0.03 and 0.01, respectively. These errors are comparable to or smaller than those arising from current levels of observational uncertainty. Furthermore, we estimate that the GRMHD simulated discs from which these error estimates are obtained correspond to effective disc luminosities of about 0.4–0.7 Eddington, and that the errors will be smaller for discs with luminosities of 0.3 Eddington or less, which are used in the continuum-fitting method. We thus conclude that use of the Novikov–Thorne thin-disc model does not presently limit the accuracy of the continuum-fitting method of measuring black hole spin.

It is generally thought that the light coming from the inner plunging region of black hole accretion discs contributes negligibly to the disc's overall spectrum, i.e. the plunging fluid is swallowed by the black hole before it has time to radiate. In the standard disc model used to fit X-ray observations of accretion discs, the plunging region is assumed to be perfectly dark. However, numerical simulations that include the full physics of the magnetized flow predict that a small fraction of the disc's total luminosity emanates from the plunging region. We investigate the observational consequences of this neglected inner light. We compute radiative transfer based disc spectra that correspond to 3D general relativistic magnetohydrodynamic simulated discs (which produce light inside their plunging regions). In the context of black hole spin estimation, we find that the neglected inner light only has a modest effect (this bias is less than typical observational systematic errors). For rapidly spinning black holes, we find that the combined emission from the plunging region produces a weak power-law tail at high energies. This indicates that infalling matter is the origin for some of the `coronal' emission observed in the thermal dominant and steep power-law states of X-ray binaries.

We present results from two long-duration GRMHD simulations of advection-dominated accretion around a non-spinning black hole. The first simulation was designed to avoid significant accumulation of magnetic flux around the black hole. This simulation was run for a time of 200,000GM/c^3 and achieved inflow equilibrium out to a radius \sim90GM/c^2. Even at this relatively large radius, the mass outflow rate \dot{M}{out} is found to be only 60% of the net mass inflow rate \dot{M}{BH} into the black hole. The second simulation was designed to achieve substantial magnetic flux accumulation around the black hole in a magnetically arrested disc. This simulation was run for a shorter time of 100,000GM/c^3. Nevertheless, because the mean radial velocity was several times larger than in the first simulation, it reached inflow equilibrium out to a radius \sim170GM/c^2. Here, \dot{M}{out} becomes equal to \dot{M}{BH} at r\sim 160GM/c^2. Since the mass outflow rates in the two simulations do not show robust convergence with time, it is likely that the true outflow rates are lower than our estimates. The effect of black hole spin on mass outflow remains to be explored. Neither simulation shows strong evidence for convection, though a complete analysis including the effect of magnetic fields is left for the future.

In recent years, general relativistic magnetohydrodynamic (GRMHD) simulations have produced more realistic models for black hole disks and jets. However the complexity of the simulations has created a disconnect between simulations and theory: it is often unclear whether the simulated physics is correctly described by standard, semi-analytic disk and jet models. In this thesis, we describe new GRMHD simulations of black hole disks and jets. We compare the simulations to standard disk and jet models. We show that GRMHD thin disks are well described by the Novikov-Thorne model, and GRMHD jets are well described by the Blandford-Znajek model. Then, guided by the simulations, we develop two extensions of the standard thin disk model: a radially varying (\alpha(r)) viscosity prescription and an analytical disk solution with nonzero stress at the innermost stable circular orbit.

A typical galaxy is thought to contain tens of millions of stellar-mass black holes, the collapsed remnants of once massive stars, and a single nuclear supermassive black hole. Both classes of black holes accrete gas from their environments. The accreting gas forms a flattened orbiting structure known as an accretion disk. During the past several years, it has become possible to obtain measurements of the spins of the two classes of black holes by modeling the x-ray emission from their accretion disks. Two methods are employed, both of which depend upon identifying the inner radius of the accretion disk with the innermost stable circular orbit, whose radius depends only on the mass and spin of the black hole. In the Fe Kα method, which applies to both classes of black holes, one models the profile of the relativistically broadened iron line with a special focus on the gravitationally redshifted red wing of the line. In the continuum-fitting (CF) method, which has so far only been applied to stellar-mass black holes, one models the thermal x-ray continuum spectrum of the accretion disk. We discuss both methods, with a strong emphasis on the CF method and its application to stellar-mass black holes. Spin results for eight stellar-mass black holes are summarized. These data are used to argue that the high spins of at least some of these black holes are natal, and that the presence or absence of relativistic jets in accreting black holes is not entirely determined by the spin of the black hole.

We use the Novikov-Thorne thin disk model to fit the thermal continuum X-ray spectra of black hole X-ray binaries, and thereby extract the dimensionless spin parameter a∗=a/M of the black hole as a parameter of the fit. We summarize the results obtained to date for six systems and describe work in progress on additional systems. We also describe recent methodological advances, our current efforts to make our analysis software fully available to others, and our theoretical efforts to validate the Novikov-Thorne model.

The standard general relativistic model of a razor-thin accretion disc around a black hole, developed by Novikov & Thorne (NT) in 1973, assumes the shear stress vanishes at theradius of the innermost stable circular orbit (ISCO) and that, outside the ISCO, the shear stress is produced by an effective turbulent viscosity. However, astrophysical accretion discs are not razor thin; it is uncertain whether the shear stress necessarily vanishes at the ISCO, and the magnetic field, which is thought to drive turbulence in discs, may contain large-scale structures that do not behave like a simple local scalar viscosity. We describe 3D general relativistic magnetohydrodynamic simulations of accretion discs around black holes with a range of spin parameters, and we use the simulations to assess the validity of the NT model. Our fiducial initial magnetic field consists of multiple (alternating polarity) poloidal field loops whose shape is roughly isotropic in the disc in order to match the isotropic turbulence expected in the poloidal plane. For a thin disc with an aspect ratio |h/r|∼0.07 around a non-spinning black hole, we find a decrease in the accreted specific angular momentum of 2.9 percent relative to the NT model and an excess luminosity from inside the ISCO of 3.5 per cent. The deviations in the case of spinning black holes are also of the same order. In addition, the deviations decrease with decreasing |h/r|. We therefore conclude that magnetized thin accretion discs in X-ray binaries in the thermal/high-soft spectral state ought to be well described by the NT model, especially at luminosities below 30 per cent of Eddington where we expect a very small disc thickness |h/ r| 0.05. We use our results to determine the spin equilibrium of black hole accretion discs with a range of thicknesses and to determine how electromagnetic stresses within the ISCO depend upon black hole spin and disc thickness. We find that the electromagnetic stress and the luminosity inside the ISCO depend on the assumed initial magnetic field geometry. We consider a second geometry with field lines following density contours, which for thin discs leads to highly radially elongated magnetic field lines. This gives roughly twice larger deviations from NT for both the accreted specific angular momentum and the luminosity inside the ISCO. Lastly, we find that the disc’s corona (including any wind or jet) introduces deviations from NT in the specific angular momentum that are comparable to those contributed by the disc component, while the excess luminosity of bound gas from within the ISCO is dominated by only the disc component. Based on these indications, we suggest that differences in results between our work and other similar work are due to differences in the assumed initial magnetic field geometry as well as the inclusion of disc