Person:

Mazur, Eric

We explore the chemical contribution to surface-enhanced Raman scattering (SERS) in mixed-metal substrates, both experimentally and by computer simulation. These substrates are composed of a chemically active, transition-metal overlayer deposited on an effective SERS substrate. We report improved analytical enhancement factors obtained by using a small surface coverage of palladium or platinum over nanostructured silver substrates. Theoretical predictions of the chemical contribution to the surface enhancement using density functional theory support the experimental results. In addition, these approaches show that the increased enhancement is due not only to an increase in surface coverage of the analyte but also to a higher Raman scattering cross section per molecule. The additional chemical enhancement in mixed-metal SERS substrates correlates with the binding energy of the analyte on the surface and includes both static and dynamical effects. SERS using mixed-metal substrates has the potential to improve sensing for a large group of analyte molecules and to aid the development of chemically specific SERS-based sensors.

We observe an insulator-to-metal transition in crystalline silicon doped with sulfur to nonequilibrium concentrations using ion implantation followed by pulsed-laser melting and rapid resolidification. This insulator-to-metal transition is due to a dopant known to produce only deep levels at equilibrium concentrations. Temperature-dependent conductivity and Hall effect measurements for temperatures T>1.7  K both indicate that a transition from insulating to metallic conduction occurs at a sulfur concentration between 1.8 and 4.3×1020  cm−3. Conduction in insulating samples is consistent with variable-range hopping with a Coulomb gap. The capacity for deep states to effect metallic conduction by delocalization is the only known route to bulk intermediate band photovoltaics in silicon.

Spindles are arrays of microtubules that segregate chromosomes during cell division. It has been difficult to validate models of spindle assembly due to a lack of information on the organization of microtubules in these structures. Here we present a method, based on femtosecond laser ablation, capable of measuring the detailed architecture of spindles. We used this method to study the metaphase spindle in Xenopus laevis egg extracts and found that microtubules are shortest near poles and become progressively longer toward the center of the spindle. These data, in combination with mathematical modeling, imaging, and biochemical perturbations, are sufficient to reject previously proposed mechanisms of spindle assembly. Our results support a model of spindle assembly in which microtubule polymerization dynamics are not spatially regulated, and the proper organization of microtubules in the spindle is determined by nonuniform microtubule nucleation and the local sorting of microtubules by transport.

Hyperdoped black silicon fabricated with femtosecond laser irradiation has attracted interest for applications in infrared photodetectors and intermediate band photovoltaics due to its sub-bandgap optical absorptance and light-trapping surface. However, hyperdoped black silicon typically has an amorphous and polyphasic polycrystalline surface that can interfere with carrier transport, electrical rectification, and intermediate band formation. Past studies have used thermal annealing to obtain high crystallinity in hyperdoped black silicon, but thermal annealing causes a deactivation of the sub-bandgap optical absorptance. In this study, nanosecond laser annealing is used to obtain high crystallinity and remove pressure-induced phases in hyperdoped black silicon while maintaining high sub-bandgap optical absorptance and a light-trapping surface morphology. Furthermore, it is shown that nanosecond laser annealing reactivates the sub-bandgap optical absorptance of hyperdoped black silicon after deactivation by thermal annealing. Thermal annealing and nanosecond laser annealing can be combined in sequence to fabricate hyperdoped black silicon that simultaneously shows high crystallinity, high abovebandgap and sub-bandgap absorptance, and a rectifying electrical homojunction. Such nanosecond laser annealing could potentially be applied to non-equilibrium material systems beyond hyperdoped black silicon.

Generation of entangled photons in nonlinear media constitutes a basic building block of modern photonic quantum technology. Current optical materials are severely limited in their ability to produce three or more entangled photons in a single event due to weak nonlinearities and challenges achieving phase-matching. We use integrated nanophotonics to enhance nonlinear interactions and develop protocols to design multimode waveguides that enable sustained phase-matching for third order spontaneous parametric down-conversion (TOSPDC). We predict a generation efficiency of 0.13 triplets/s/mW of pump power in TiO2- based integrated waveguides, an order of magnitude higher than previous theoretical and experimental demonstrations. We experimentally verify our device design methods in TiO2 waveguides using third-harmonic generation (THG), the reverse process of TOSPDC that is subject to the same phase-matching constraints. We finally discuss the effect of finite detector bandwidth and photon losses on the energy-time coherence properties of the expected TOSPDC source.

Background: Caenorhabditis elegans actively crawls down thermal gradients until it reaches the temperature of its prior cultivation, exhibiting what is called cryophilic movement. Implicit in the worm's performance of cryophilic movement is the ability to detect thermal gradients, and implicit in regulating the performance of cryophilic movement is the ability to compare the current temperature of its surroundings with a stored memory of its cultivation temperature. Several lines of evidence link the AFD sensory neuron to thermotactic behavior, but its precise role is unclear. A current model contends that AFD is part of a thermophilic mechanism for biasing the worm's movement up gradients that counterbalances the cryophilic mechanism for biasing its movement down gradients. Results: We used tightly-focused femtosecond laser pulses to dissect the AFD neuronal cell bodies and the AFD sensory dendrites in C. elegans to investigate their contribution to cryophilic movement. We establish that femtosecond laser ablation can exhibit submicrometer precision, severing individual sensory dendrites without causing collateral damage. We show that severing the dendrites of sensory neurons in young adult worms permanently abolishes their sensory contribution without functional regeneration. We show that the AFD neuron regulates a mechanism for generating cryophilic bias, but we find no evidence that AFD laser surgery reduces a putative ability to generate thermophilic bias. In addition, although disruption of the AIY interneuron causes worms to exhibit cryophilic bias at all temperatures, we find no evidence that laser killing the AIZ interneuron causes thermophilic bias at any temperature. Conclusion: We conclude that laser surgical analysis of the neural circuit for thermotaxis does not support a model in which AFD opposes cryophilic bias by generating thermophilic bias. Our data supports a model in which the AFD neuron gates a mechanism for generating cryophilic bias.

We compare the optical properties, chemical composition, and crystallinity of silicon microstructures formed in the presence of SF6 by femtosecond laser irradiation and by nanosecond laser irradiation. In spite of very different morphology and crystallinity, the optical properties and chemical composition of the two types of microstructures are very similar. The structures formed with femtosecond (fs) pulses are covered with a disordered nanocrystalline surface layer less than 1 um thick, while those formed with nanosecond (ns) pulses have very little disorder. Both ns-laser-formed and fs-laser-formed structures absorb near-infrared (1.1 – 2.5 um) radiation strongly and have roughly 0.5% sulfur impurities.

We present a novel method for three-dimensional optical data storage that has submicrometer size resolution, provides a large contrast in index of refraction, and is applicable to a wide range of transparent materials. Bits are recorded by use of a 0.65-N.A. objective to focus 100-fs laser pulses inside the material. The laser pulse produces a submicrometer-diameter structurally altered region with high contrast in index of refraction. We record binary information by writing such bits in multiple planes and read it out with a microscope objective with a short depth of field. We demonstrate data storage and retrieval with 2-μm in-plane bit spacing and 15-μm interplane spacing (17 Gbits/cm^3). Scanning electron microscopy and atomic force microscopy show structural changes confined to an area 200 nm in diameter.

Recently, diffraction elements that reverse the color sequence normally observed in planar diffraction gratings have been found in the wing scales of the butterfly Pierella luna. Here, we describe the creation of an artificial photonic material mimicking this reverse color-order diffraction effect. The bioinspired system consists of ordered arrays of vertically oriented microdiffraction gratings. We present a detailed analysis and modeling of the coupling of diffraction resulting from individual structural components and demonstrate its strong dependence on the orientation of the individual miniature gratings. This photonic material could provide a basis for novel developments in biosensing, anticounterfeiting, and efficient light management in photovoltaic systems and light-emitting diodes.

Peer Instruction, a well-known student-centered teaching method, engages students during class through structured, frequent questioning and is often facilitated by classroom response systems. The central feature of any Peer Instruction class is a conceptual question designed to help resolve student misconceptions about subject matter. We provide students two opportunities to answer each question—once after a round of individual reflection and then again after a discussion round with a peer. The second round provides students the choice to “switch” their original response to a different answer. The percentage of right answers typically increases after peer discussion: most students who answer incorrectly in the individual round switch to the correct answer after the peer discussion. However, for any given question there are also students who switch their initially right answer to a wrong answer and students who switch their initially wrong answer to a different wrong answer. In this study, we analyze response switching over one semester of an introductory electricity and magnetism course taught using Peer Instruction at Harvard University. Two key features emerge from our analysis: First, response switching correlates with academic selfefficacy. Students with low self-efficacy switch their responses more than students with high self-efficacy. Second, switching also correlates with the difficulty of the question; students switch to incorrect responses more often when the question is difficult. These findings indicate that instructors may need to provide greater support for difficult questions, such as supplying cues during lectures, increasing times for discussions, or ensuring effective pairing (such as having a student with one right answer in the pair). Additionally, the connection between response switching and self-efficacy motivates interventions to increase student self-efficacy at the beginning of the semester by helping students develop early mastery or to reduce stressful experiences (i.e., high-stakes testing) early in the semester, in the hope that this will improve student learning in Peer Instruction classrooms.