Person:

Fang, Jieping

An equilibrium multielectron bubble (MEB) in liquid helium is a fascinating object with a spherical two-dimensional electron gas on its surface. After it was first observed a few decades ago, a plethora of physical properties of MEBs, for example, a tunable surface electron density, have been predicted. In this thesis, we will discuss two new methods to create MEBs in liquid helium. Before the discussion, the way to generate a large number of electrons in a low temperature system will be discussed, including thermionic emission and field emission in helium. In the first new method to make MEBs, we used a dome-shaped cell filled with superfluid helium in which an MEB was created and confined at the dome. The lifetime of the MEB was substantially longer than the previously reported observations of MEBs. In the second method, MEBs were extracted from the vapor sheath around an electrically heated tungsten filament submerged in liquid helium, either by a high electric field (up to 15 kV/cm) or by a sudden increase of a negative pressure in liquid helium. High-speed photography was used to capture the MEB's motion. A method to determine the number of electrons was developed by monitoring the oscillations of the MEBs. Finally, an electromagnetic trap was designed to localize the MEBs created using the second method, which was important for future studies of the properties of MEBs.

We study two techniques to create electrons in a liquid helium environment. One is thermionic emission of tungsten filaments in a low temperature cell in the vapor phase with a superfluid helium film covering all surfaces; the other is operating a glowing filament immersed in bulk liquid helium. We present both the steady state and rapid sweep I-V curves and the electron current yield. These curves, having a negative dynamic resistance region, differ remarkably from those of a vacuum tube filament. A novel low temperature vapor-phase electron collector for which the insulating helium film on the collector surface can be removed is used to measure emission current. We also discuss our achievement of producing multielectron bubbles in liquid helium by a new method.

An equilibrium multielectron bubble (MEB) in liquid helium is a fascinating object with a spherical two-dimensional electron gas on its surface. We discuss two ways in which they have been created. For MEBs that have been observed in the dome of a cylindrical cell with an unexpectedly short lifetime, we show analytically why these MEBs can discharge by tunneling. Using a novel method, MEBs have been extracted from a vapor sheath around a hot filament in superfluid helium by applying electric fields up to 15 kV/cm, and photographed with high-speed video. Charges as high as (1.6 × 10^{−9} C) ((∼10^{10} electrons)) have been measured. The latter method provides a means of capture in an electromagnetic trap to allow the study of the extensive exciting properties of these elusive objects.

Multielectron bubbles (MEBs) in liquid helium were first observed in the late 1970s, but their properties have never been explored experimentally due to their short lifetimes and the difficulty to localize them. We report the observation of long- lived MEBs in a novel cell filled with superfluid helium at static negative pressures. MEBs were extracted from the electron filled vapor sheath of a heated filament loop embedded in the superfluid helium and observed by high-speed photography. MEBs are 2D electron gases on the 3D surface of hollow helium bubbles. Diameters can range from nanometers to millimeters, depending on the number of enclosed electrons. Electrons move in angular momentum states; deformations of the surface are called spherical ripplons. The attractive electron-ripplon interaction leads to an unusual form of superconductivity. If they can be compressed, Wigner crystallization and quantum melting can be observed, as well as a new phase for localization called the ripplo- polaron lattice. MEBs are unstable to tunneling discharge when pressed against a surface. Just as Bose gases are captured in a trap for study, MEBs must also be localized away from walls. We shall discuss methods of capturing them in an electromagnetic trap embedded in the liquid helium.