Person:

Friend, Cynthia

Density functional theory, informed by experimental studies, is used to investigate the interplay of surface morphology, the adsorption site of reactants, the nature of the interaction between adsorbates and the surface, the potential energy landscape for adsorbates on the surface, adsorbate coverage, temperature, and the dynamic evolution of these factors during adsorption and reaction. We summarize our current understanding of Au atom release on the (111) surface and the corresponding effects on adsorption and reactivity. Gold was selected for these investigations because of the recent intense interest in the activity of gold nanoparticles for several important catalytic reactions. Fundamental experimental studies on Au single-crystal surfaces have established that atomic O is extremely active for oxidation of CO and olefins, that the local bonding of O is an important factor in determining the reactivity and selectivity for oxidation, and that Au atom release is induced by electronegative adsorbates, such as O, Cl, and S. These experimental results guided our theoretical studies. Density functional theory is an extremely useful tool since it evaluates the energetics associated with the incorporation of gold into the adsorbate layer, while providing fundamental physical insight into the underlying cause of gold incorporation. We use our results from static DFT calculations along with ab initio molecular dynamics simulations to understand the effect of surface morphology on the activity of gold for CO oxidation. Our investigation of Au atom release and incorporation induced by electronegative atoms clearly illustrates the importance of using experiments in combination with theory to establish the importance of and the underlying reasons for metal atom release and the affect on bonding and reactivity.

A fully dynamical approach using ab initio molecular dynamics (AIMD) simulations is applied to the investigation of CO oxidation on O-covered Au(111). We investigate how the activity of gold depends upon temperature, oxygen coverage, and surface structure. On clean Au(111) at 500 K, CO binds transiently on top of Au atoms, spending a small fraction (~7%) of the total simulation time adsorbed on the surface. The presence of O on the surface increases the residence time for CO by more than 4 times on a surface containing 0.22 ML of O. On the other hand, the probability for CO adsorption decreases with oxygen coverage from 31% at 0.22 ML of oxygen to 15% at 0.55 ML of oxygen. Our simulations show that the activity for CO reaction with O to yield (CO_2) decreases with increasing oxygen coverage. We attribute this decrease of activity to (1) the decrease in the CO adsorption probability as the oxygen coverage increases and (2) the decreasing amount of reactive chemisorbed oxygen (oxygen bound in a 3-fold site) with increasing total oxygen coverage. We show that oxygen bound in sites of local 3-fold coordination (chemisorbed oxygen) is nearly 2 times more reactive than other oxygen species observed on the surface, namely, surface and subsurface oxide. Our work demonstrates the value and feasibility of using AIMD to study surface reactions.

Weak inter-adsorbate interactions are shown to play a crucial role in determining surface structure, with major implications for its catalytic reactivity. This is exemplified here in the case of acetate bound to Au(110), where the small extra energy of the van der Waals interactions among the surface-bound groups drives massive restructuring of the underlying Au. Acetate is a key intermediate in electro-oxidation of CO2 and a poison in partial oxidation reactions. Metal atom migration originates at surface defects and is likely facilitated by weakened Au–Au interactions due to bonding with the acetate. Even though the acetate is a relatively small molecule, weak intermolecular interaction provides the energy required for molecular self-assembly and reorganization of the metal surface.

The Au(110) surface offers unique advantages for atomically-resolved model studies of catalytic oxidation processes on gold. We investigate the adsorption of oxygen on Au(110) using a combination of scanning tunneling microscopy (STM) and density functional theory (DFT) methods. We identify the typical (empty-states) STM contrast resulting from adsorbed oxygen as atomic-sized dark features of electronic origin. DFT-based image simulations confirm that chemisorbed oxygen is generally detected indirectly, from the binding-induced electronic structure modification of gold. STM images show that adsorption occurs without affecting the general structure of the pristine Au(110) missing-row reconstruction. The tendency to form one-dimensional structures is observed already at low coverage (< 0.05 ML), with oxygen adsorbing on alternate sides of the reconstruction ridges. Consistently, calculations yield preferred adsorption on the (111) facets of the reconstruction, on a 3-fold coordination site, with increased stability when adsorbed in chains. Gold atoms with two oxygen neighbors exhibit enhanced electronic hybridization with the O states. Finally, the species observed are reactive to CO oxidation at 200 K and desorption of CO2 leaves a clean and ordered gold surface.

A highly modular synthesis of designed catalysts with controlled bimetallic nanoparticle size and composition and a well-defined structural hierarchy is demonstrated. Exemplary catalysts—bimetallic dilute Ag-in-Au nanoparticles partially embedded in a porous SiO2 matrix (SiO2-AgxAuy)—were synthesized by the decoration of polymeric colloids with the bimetallic nanoparticles followed by assembly into a colloidal crystal backfilled with the matrix precursor and subsequent removal of the polymeric template. We show that these new catalysts architectures are significantly better than nanoporous dilute AgAu alloy catalysts (nanoporous Ag0.03Au0.97) while retaining a clear predictive relationship between their surface reactivity with that of single crystal Au surfaces. This paves the way for broadening the range of new catalyst architectures required for translating the designed principles developed under controlled conditions to designed catalysts under operating conditions for highly selective coupling of alcohols to form esters. Excellent catalytic performance of the porous SiO2-AgxAuy structure for selective oxidation of both methanol and ethanol to produce esters with high conversion efficiency, selectivity, and stability was demonstrated, illustrating the ability to translate design principles developed for support-free materials to the colloid-templated structures. The synthetic methodology reported is customizable for the design of a wide range of robust catalytic systems inspired by design principles derived from model studies. Fine control over the composition, morphology, size, distribution and availability of the supported nanoparticles was demonstrated.

The relative stability of carboxylates on Au(110) was investigated as part of a comprehensive study of adsorbate binding on Group IB metals that can be used to predict and understand how to control reactivity in heterogeneous catalysis. The binding efficacy of carboxylates is only weakly dependent on alkyl chain length for relatively short-chain molecules, as demonstrated using quantitative temperature-programmed reaction spectroscopy. Corresponding density functional theory (DFT) calculations demonstrated that the bidentate anchoring geometry is rigid and restricts the amount of additional stabilization through adsorbate-surface van der Waals (vdW) interactions which control stability for alkoxides. A combination of scanning tunneling microscopy (STM) and low-energy electron diffraction (LEED) shows that carboxylates form dense local islands on Au(110). Complementary DFT calculations demonstrate that adsorbate–adsorbate interactions provide additional stabilization that increases as a function of alkyl chain length for C2 and C3 carboxylates. Hence, overall stability is generally a function of the anchoring group to the surface and the inter-adsorbate interaction. This study demonstrates the importance of these two important factors in describing binding of key catalytic intermediates.

Bimetallic, nanostructured materials hold promise for improving catalyst activity and selectivity, yet little is known about the dynamic compositional and structural changes that these systems undergo during pretreatment that leads to e cient catalyst function. Here we use ozone-activated silver–gold alloys in the form of nanoporous gold as a case study to demonstrate the dynamic behaviour of bimetallic systems during activation to produce a functioning catalyst. We show that it is these dynamic changes that give rise to the observed catalytic activity. Advanced in situ electron microscopy and X-ray photoelectron spectroscopy are used to demonstrate that major restructuring and compositional changes occur along the path to catalytic function for selective alcohol oxidation. Transient kinetic measurements correlate the restructuring to three types of oxygen on the surface. The direct influence of changes in surface silver concentration and restructuring at the nanoscale on oxidation activity is demonstrated. Our results demonstrate that characterization of these dynamic changes is necessary to unlock the full potential of bimetallic catalytic materials.